Green Moles’ team can help you choose the right attachments for your Picote Millers.
Picote’s drain cleaning & unclogging tool range, efficiently covers a wide range of challenging jobs including:
- Lateral reinstatements on liners & patch repairs
- Hard & soft blockages
- Scale / rust build-up
- Complete sewer pipe cleaning (all diameter)
- Tree roots
- Concrete, slurry or grout
- Metal obstructions
- Fats, oil & grease
- Pipe preparation for repairs
In this page we are showcasing a small selection from Picote’s large product range.
Picote’s drain cleaning & unclogging tool range, efficiently covers a wide range of challenging jobs including:
- Lateral reinstatements on liners & patch repairs
- Hard & soft blockages
- Scale / rust build-up
- Complete sewer pipe cleaning (all diameter)
- Tree roots
- Concrete, slurry or grout
- Metal obstructions
- Fats, oil & grease
- Pipe preparation for repairs
In this page we are showcasing a small selection from Picote’s large product range.
PICOTE DRAIN CLEANING CHAINS
Picote chains are available in 3 design types Original, 3D and Cyclone, there are also 4 carbide types to choose from, each combination with its special use. Ask Green Moles for guidance on how to choose your Picote chain, our staff will be able to assist in Greek or English and can arrange delivery across Greece or Cyprus.
Picote’s high-end Chains perform outstandingly even in challenging situations, specialty PVC Chains are also available for work inside PVC pipes. Tiger Chains are the new, lighter Picote range featuring extra hard carbide teeth.
Options are available for DN32 (1¼” / Φ32) to DN300 (12″ / Φ300) pipes.
 |
PICOTE ORIGINAL CHAINSThe Picote Original chains are attached to the shaft with two sockets and the opening of the chain is adjusted by the distance of the two ends according to each situation. |
 |
PICOTE 3D CHAINSSelf-adjusting depending on the rotation speed (rpm). Great for diameter transitions or where access is limited. Available in Premium and PVC models:
|
 |
PICOTE CYCLONE CHAINSMore efficient and faster than regular cleaning chains. The centrifugal force evenly distributes the rotation inside the pipe, by maintaining a central position. The chain does not hit against the side of the pipe when in use, making them much safer to clean & descale pipes that are in bad condition or even cracked. Available in Premium, PVC, Standard and Tiger Ranges. |
PICOTE PREMIUM RANGELarger and heavier U carbide (7-ridge) makes it stronger and faster than any other chain on the market. A versatile tool perfect for cast iron pipes. For tough descaling, hard deposits and removing residual concrete or failed liner. |
 |
PICOTE TIGER RANGEFits in between the Standard & Premium versions. Equipped with extra-hard, very long lasting carbide teeth with a lighter chain material to create a gentle but extremely durable option for cleaning metallic and cast iron pipes. |
 |
PICOTE STANDARD RANGEStar carbide (3-ridge). An efficient general cleaning chain. Suitable for clay, concrete and cast iron pipes. |
 |
PICOTE PVC RANGENo carbides. General cleaning chain to restore flow quickly and safely or to remove light roots in fragile pipes such as plastic, copper, asbestos or clay. |
 |
|
PICOTE ORIGINAL CHAINSThe Picote Original chains are attached to the shaft with two sockets and the opening of the chain is adjusted by the distance of the two ends according to each situation. |
|
PICOTE 3D CHAINSSelf-adjusting depending on the rotation speed (rpm). Great for diameter transitions or where access is limited. Available in Premium and PVC models:
|
|
PICOTE CYCLONE CHAINSMore efficient and faster than regular cleaning chains. The centrifugal force evenly distributes the rotation inside the pipe, by maintaining a central position. The chain does not hit against the side of the pipe when in use, making them much safer to clean & descale pipes that are in bad condition or even cracked. Available in Premium, PVC, Standard and Tiger Ranges. |
PICOTE PREMIUM RANGELarger and heavier U carbide (7-ridge) makes it stronger and faster than any other chain on the market. A versatile tool perfect for cast iron pipes. For tough descaling, hard deposits and removing residual concrete or failed liner. |
|
PICOTE TIGER RANGEFits in between the Standard & Premium versions. Equipped with extra-hard, very long lasting carbide teeth with a lighter chain material to create a gentle but extremely durable option for cleaning metallic and cast iron pipes. |
|
PICOTE STANDARD RANGEStar carbide (3-ridge). An efficient general cleaning chain. Suitable for clay, concrete and cast iron pipes. |
|
PICOTE PVC RANGENo carbides. General cleaning chain to restore flow quickly and safely or to remove light roots in fragile pipes such as plastic, copper, asbestos or clay. |
|
PICOTE DRILL HEADS
Picote Drill Heads can easily cut into tough blockages such as tree roots, grease or heavy scale and can be used to unblock pipes in order to make space for larger tools to follow.
Special Drill Heads can be attached in front of chains to create an initial opening in the blockage to then allow the chains to open and better perform their cleaning function.
PICOTE SMART SPIDER
The Smart Spider is a unique tool which is not only highly effective at removing fats, oil & grease, but easily navigates 90° bends even if the base of the pipe or other sections are missing. Simply switch over the legs to use a 4″ Smart Spider with the Midi, Super Midi or Maxi Miller for 6″ pipe. The Smart Spider is also available in 6″, 8″ and 9″ for the Power+ for ultimate descaling capabilities.
PICOTE TWISTER CONCRETE REMOVER
Leave no stone unturned with the Picote Twister Concrete Remover. A global problem-solver this tool coupled with the strength of the Maxi Miller (4″ and 6″) or brute force of the Power+ (6″- 9″) saves time and money at the worksite. If there is a gap in the concrete, you can add a steering axle to guide the tool to the best position and power your way through the blockage.
PICOTE MINI SMART SWEEPER
The Mini Smart Sweeper is an incredible descaling tool. Providing increased efficiency in small pipes, this truly is a gamechanger for 2″ pipes. Remove tuberculate and grease from bathroom lines and kitchen sinks. The body of the Mini Smart Sweeper is compact and self-adjusting. Navigate through challenging bends and P-traps in 2″ pipe and at the same time getting them cleaner than ever before!
PICOTE TWISTER METAL GRINDER
Quickly and efficiently grinds away most metal including rebar, steel rods, nails, screws, and lead joints in DN100 pipes. Safe option even inside PVC and clay pipe. Available for 12mm shaft.
PICOTE SMART CUTTER
Another Picote patent, Smart Cutter™ is a truly groundbreaking and versatile tool that has changed the trenchless industry worldwide. Originally created as a lateral reinstatement cutter for inside buildings, the Smart Cutter™ is also suitable for cleaning pipes from DN32 to DN300.
PICOTE BRUSHES
Cleaning brushes for removing fine dust or light mineral deposits in PVC and fragile pipes. Also used for brush coating and pipe preparation.
PICOTE PRO KITS
With Picote’s Pro Kits you can have all the most commonly used tools to tackle almost every situation. Available for cutting / reinstatements (lateral openings, etc) or cleaning (scale, blockages, etc).
PICOTE GRABBERS
Original Grabber DN100+ | Large Grabber DN150+ | Small Grabber DN50-DN70
Picote’s Grabber allows you to quickly retrieve lost tools or foreign objects blocking a pipe, avoiding costly and time-consuming excavation.
While viewing the location with your CCTV camera, simply push the grabber into position. The grabbing head is easily rotated so you can locate and grip the item with precision.
BECOME A CERTIFIED PICOTE BRUSH COATING INSTALLER
Become a certified Picote Installer and clean, unblock or renovate old or deteriorated drains and sewers from 32mm to 300mm diameter with the Picote Brush Coating™ System, using Picote’s specialized equipment.
BECOME A CERTIFIED PICOTE BRUSH COATING INSTALLER
Become a certified Picote Installer and clean, unblock or renovate old or deteriorated drains and sewers from 32mm to 300mm diameter with the Picote Brush Coating™ System, using Picote’s specialized equipment.
SHAFT EXTENSIONS & REPLACEMENT SHAFTS
Available as replacement or extension shafts in different lengths for each miller, ranging thickness from 6mm to 18mm. Also available shaft connectors for extending shafts, and Shaft sockets to use the Picote Shaft with a hand drill.
MILLER SPARE PARTS & UPGRADE KITS
For everything on your Picote Miller there is a spare part which you can easily replace by yourself, and upgrade kits, if you want to take your miller one step further, including a foldable handle or even an integrated sewer camera.
SHAFT EXTENSIONS & REPLACEMENT SHAFTS
Available as replacement or extension shafts in different lengths for each miller, ranging thickness from 6mm to 18mm. Also available shaft connectors for extending shafts, and Shaft sockets to use the Picote Shaft with a hand drill.
MILLER SPARE PARTS & UPGRADE KITS
For everything on your Picote Miller there is a spare part which you can easily replace by yourself, and upgrade kits, if you want to take your miller one step further, including a foldable handle or even an integrated sewer camera.
Dipl.-Ing. Kalle KuusistoGET THE FULL PICOTE CATALOGUE
Request the full Picote’s product list, by submitting this form.